Laser cutting and bending
Laser cut and folded parts for Central West businesses.
Send your DXF or STEP files and get a quote from our Molong workshop. We cut on a Bystronic laser or plasma table and fold on a CNC press brake, all under one roof.
- Laser to 20 mm, plasma to 50 mm
- Cut and folded in one workshop
- Lead time confirmed on every quote
Can we cut it?
Pick your material and thickness for an instant answer.
Yes, on the laser.
6 mm mild steel is within our 20 mm laser capacity for mild steel.
Quote this jobLaser cutting
Sheet and plate cut from your files
Our Bystronic laser cuts sheet and plate straight from your DXF files, so repeat orders are cut from the same program. It's our main machine for brackets, gussets, plates, panels and kit parts.
| Machine | Bystronic ByCut Smart 6225 |
|---|---|
| Sheet size | Up to 6,200 × 2,500 mm |
| Mild steel | Up to 20 mm |
| Stainless steel | Up to 15 mm |
| Aluminium | Up to 15 mm |
| Galvanised plate | Yes |
Plasma profile cutting
Heavy plate cutting
For thicker mild steel we profile cut on our plasma table with a Lincoln Electric Spirit II. It's the right choice for base plates, heavy brackets and wear parts.
| Power source | Lincoln Electric Spirit II, 275 A |
|---|---|
| Mild steel | Up to 50 mm |
| Over 32 mm | Cuts start from the plate edge rather than being pierced, so tell us about internal holes |
| Plate stock | On consignment, including BIZ400 |
CNC bending
CNC press brake folding
Cut parts go straight to our Ermaksan Speed-Bend Pro press brake. Its Delem DA-69T control shows each bend in 3D before the first fold, checked against the model you send.
| Press brake | Ermaksan Speed-Bend Pro |
|---|---|
| Control | Delem DA-69T, with 3D bend graphics |
| Work | Sheet and plate bending |
| Files | STEP model of the finished part |
Why cut and fold together
Fewer hand-offs
- One quote and one lead time for the finished part.
- No freight or waiting between a cutter and a folder.
- Need it welded or painted too? It stays in the same workshop.
Sending us files
Get it right first time
A clean file is the fastest way to an accurate quote.
DXF for flat parts
Draw at 1:1 in millimetres, one part per file or clearly separated, with no title blocks or dimensions on the cutting layer.
STEP for anything folded
Send a STEP model of the finished part so we can check the bends and work out the flat pattern.
Tell us the basics
Material, thickness, quantity and when you need it. A PDF drawing helps when tolerances or holes matter.
How it works
From drawing to parts in three steps
Send your files
Upload DXF or STEP files with the quote form, or email them.
Get your quote
We check your drawings and come back with a price and a lead time. Need it urgently? Tell us.
Approve and we make it
Send a purchase order to accept and your job goes into production. Plate is on the shelf, so we don't wait on material.
FAQ
Before you send a job
Not sure if we can cut it? Use the checker above, ask us or call 02 6366 8584.
What files do you need?
DXF files for flat parts and a STEP model for anything folded. A PDF drawing with dimensions helps too.
Laser or plasma: which do I need?
We'll choose for you. Up to 20 mm mild steel usually goes on the laser for the best edge and accuracy; thicker plate goes on the plasma.
Can you cut stainless and aluminium?
Yes, on the laser, up to 15 mm.
Do you cut galvanised?
Yes, we laser cut galvanised plate. Include the thickness with your files and we’ll confirm on the quote.
How long does it take?
It depends on the job and the workshop schedule. Every quote includes a lead time, and if you need it urgently, tell us when you ask.
Do you supply the steel?
Yes. We keep plate on consignment with our supplier, including BIZ400, so jobs don’t wait on material.
Do you do one-off jobs?
We can, but we’re set up for batches and repeat work, which is where we give the best value. Tell us your quantities and how often you’ll need them.
How does payment work?
We send a quote; you accept with a purchase order. New customers pay in full before we start. Account customers pay 30 days from invoice once an account application is approved.
Get a cutting quote
Send your files and a few details. Dan in the workshop will come back to you.
Thanks, we've got it.
Your request is with Dan in the workshop. We'll be in touch using the details you gave us. Need it sooner? Call 02 6366 8584.